strategy-dev
Using Strategy Templates — copy, customize, test
Read a template's scorecard, make it your own, and test it before any real money is involved.
15 min · beginner
What you'll have when finished
- Read a template scorecard and know what each number means
- Copy a template into the Builder without changing the original
- Customize indicator settings, thresholds and exits one change at a time
- Backtest your version against the original on the same dates
- Move a customized template to paper trading, then to Go Live
Before you start
- Scorecards are past results on real prices. They describe how a rule behaved, not how it will behave next month.
- Change one thing at a time and re-run the same backtest. Changing three settings at once tells you nothing about which one helped.
- Tweaking settings until a backtest looks great is curve-fitting: the rule learns the past, not the market. Test the final version on a different date range before trusting it.
- Small accounts pay higher exchange fees. Check the scorecard on the Small-account fee setting before judging a template.
Walkthrough
-
Open the Templates tab
CEX Trade → Strategy Builder → Templates. Templates are grouped into three sections. Basic: one idea per template, easy to read. Intermediate: an entry signal plus a filter (for example "only buy above the 200 EMA"). Advanced: several indicators that must agree, often with trailing exits. Each card shows the rule in code form, e.g. MACD_HIST(12,26,9) crosses_above 0 — the numbers in brackets are the indicator settings.
Success criteria: You see the Basic, Intermediate and Advanced sections with template cards
-
Read the scorecard on each card
Every template is backtested on real prices across several markets and timeframes in two 6-month periods. "Made money in X of Y tests" = how many of those tests ended in profit. "Typical result" = the middle result (half did better, half worse). "Typical drop" = how far the account usually fell from its peak — this sets the risk badge. "Best fit" = the market and timeframe where it did best. Click "Show every test" to see every market in both periods. Use the "Scorecard fee" buttons at the top to switch between the Small-account fee and the Low fee — the same template can look very different. "Sort: Most consistent" puts templates that held up in both periods first.
Success criteria: You can say, for one template, how many tests made money at the Small-account fee
-
Test a template on your own coin
Use "Test any coin" at the top of the tab (e.g. type SOL or AVAX/USDC). Every scorecard re-runs on that coin, so you can see which templates suit it before you copy anything. Click the clear button to go back to the standard scorecards.
Success criteria: Scorecards change to show results for the coin you typed
-
Click Use Template
The Builder tab opens with a copy of the template: name, conditions with their settings, actions and risk controls. The original template never changes, so you can always start again from it. Nothing is saved until you press Save Strategy.
Success criteria: The Builder shows the template's conditions and actions
-
Rename it, then Save before changing anything
Give it a name you will recognise, e.g. "MACD Trend Starter – original". Press Save Strategy. This saved copy is your baseline: every change you make later gets compared against it.
Success criteria: The strategy appears in My Strategies
-
Backtest the baseline on your market
Backtesting tab → pick the saved strategy, your exchange, pair and timeframe, and a date range of at least 6 months (1+ year for daily candles). Run Backtest and note the return, number of trades, win rate and max drawdown. Fewer than about 10 trades is too few to judge — widen the date range.
Success criteria: You have a baseline result with at least ~10 trades
-
Customize: one change, save as a new version, re-test
Load your saved baseline from My Strategies, rename it (e.g. "… v2"), make ONE change and press Save as copy — this creates a new strategy and leaves the baseline exactly as it was (Update Strategy would overwrite it). Adjustable indicators show their settings under the condition (length, fast/slow, std dev). You can also change a threshold value, switch AND/OR, add or remove a condition, or change the exit sizes. Run the same backtest (same pair, timeframe and dates) and compare with the baseline.
Success criteria: You have two saved versions and two backtests on identical settings
-
Example 1 (Basic) — make MACD Trend Starter faster
Original: MACD (12,26,9) crosses above its signal line AND price is above the 200 EMA. Try MACD settings 8 / 21 / 5. Expect MORE trades and earlier entries, but also more false signals in sideways markets, and more fees. If v2 makes more trades but a lower return, the original was the better fit for that market. Second experiment: change the trend filter from EMA 200 to EMA 100 — the strategy will be allowed to trade more often after a downtrend ends.
Success criteria: You compared the 12/26/9 and 8/21/5 versions on the same backtest
-
Example 2 (Intermediate) — make ADX Trend Rider stricter
Original: ADX above 25 AND +DI crosses above −DI AND price above the 200 EMA. Raise ADX to 30 to only trade strong trends: fewer trades, usually fewer whipsaws. Or lower it to 20 to trade more often. The ADX length (default 14) sits under the condition — a shorter length reacts faster but is noisier.
Success criteria: You know how the ADX threshold changes the number of trades
-
Example 3 (Advanced) — two opposite templates for two kinds of market
Donchian Breakout buys a new 20-candle high when ADX shows a trend and volume is above normal. Range Reversion (Low ADX) does the opposite: it buys at the lower Bollinger band only when ADX says there is NO trend. Backtest both on the same coin and dates: one tends to do well when the other struggles. That is why they exist as a pair — and why a scorecard should be read together with the market conditions of the period it covers.
Success criteria: You backtested both templates on the same coin and dates
-
Example 4 — slow templates need long tests
Golden Cross Position (50 SMA crosses above 200 SMA) trades only a few times a year, even on 4h candles. A 3-month backtest may show zero or one trade, which says nothing. Use a date range of 1–2 years. The same applies to any template using the 200 EMA or SMA on daily candles. The backtest loads the extra history these averages need automatically, so they work from the first day of your range.
Success criteria: Your backtest of a slow template covers at least a year
-
Build your own from a template
Templates are a quick way to get a working structure. Take Stochastic Uptrend Pullback and add a volume condition (VOLUME_RATIO above 1.2) so it only buys pullbacks with real buying. Or take RSI-based templates and change RSI length from 14 to 7 for faster signals. Each change is a new saved version and a new backtest against the baseline. See the Indicator Reference guide for what every indicator and setting means.
Success criteria: You have a strategy that started from a template and has your own condition added
-
Paper trade the winner, then Go Live small
Open your best version in the Builder and click "Paper trade it". It runs on live prices with practice money using the same engine as backtests. After a few weeks, open the paper session and press Go Live if the results hold up — start with a small budget; the automatic kill switch stays on.
Success criteria: Your customized template is running in a paper session
What's next
Keep a short note for each version: what you changed and what happened. After two or three rounds you will know which settings matter for your coin and timeframe. Read the [Indicator Reference](/learning-library?guide=indicator-reference) for every indicator and setting, and follow [Paper trade → live capital](/learning-library?guide=paper-to-live-30-day-plan) before putting real money behind anything.